Brass U - Profiles (alloys)
- CW614N (Cu Zn39 Pb3)
- CW618N (Cu Zn40 Pb2 Al)
- CW622N (Cu Zn43 Pb1 Al)
- CW624N (Cu Zn43 Pb2 Al)
From these materials, we manufacture:
- cuttings in nearly all requested lengths
- parts as per drawing
Other alloys and dimensions on request.
Data sheets are available for download on www.bikar.com.
Extensive warehouse stocks of a wide variety of brass alloys ensure we stay flexible. We don‘t simply stock the standards such as Cu Zn37 or Cu Zn39 Pb.
Our portfolio also extends to special alloys such as Cu Zn37 Mn3 Al2 Pb Si, Cu Zn35 Ni3 Mn2 Al Pb and many more – stocked as bars, sheets, plates, tubes and sections.
All that glitters is not gold
At BIKAR, this old proverb applies very well to brass. We maintain vast stocks of this material. Whether for the fittings or engineering sectors – whether for release orders or a small section for fabricating a hexagon bolt. Here, diversity is the key.
Whether you need round bars from 1.5 mm in diameter, brass tubes (round or rectangular) or heavy brass plate up to 200 mm thick ...
BIKAR delivers the dimensions you need quickly and precisely.
Brass U - Profiles (CW614N | CW622N | CW618N | CW624N)
DIN alloy code
Dim. mm a x b x a x s
Cu Zn39 Pb3
Cu Zn43 Pb1 Al
Cu Zn40 Pb2 Al
Cu Zn43 Pb2 Al
Cu Zn44 Pb 2
10 x 10 x 10 x 1,0 / / / / 10 x 10 x 10 x 2,0 / / / / 15 x 15 x 15 x 2,0 / / / / 20 x 20 x 20 x 2,0 / / / / 20 x 40 x 20 x 2,0 / / / / 30 x 30 x 30 x 3,0 / / / / 40 x 40 x 40 x 4,0 / / / /
phone +49 (0)2751 9551-140
fax +49 (0)2751 9551-555
Parts from drawings
By order of the customer we manufacture non-ferrous single or standard parts according to engineering drawings, machined ready for installation.